Smoke and Carbon Detectors in Clarksville, TN
Carbon monoxide and smoke detectors are must-have items for every home. These sensors are safety devices. They were created to protect your household from two of the most deadly encounters homeowners can face: fire and carbon monoxide poisoning.
At Travis Electrical Service, our electricians are here to make sure that your detectors are in good working order all of the time. We perform various services to ensure that residents of Clarksville have reliable carbon and smoke detectors.
Ready to improve the safety of your home? Call us today and speak to one of our specialists about your home’s safety system needs.
Smoke Detector and Carbon Monoxide Detector Installation Services
If your home isn’t already outfitted with smoke or carbon detectors, it’s time to start thinking about it.
Installing smoke and carbon detectors seriously reduces the likelihood of tragic outcomes in the event of a fire or CO leak.
Additionally, it’s now required by law to have these sensors installed in your home. That’s why we are proud to offer smoke and carbon monoxide detector installation services for those near Clarksville and surrounding areas.
Where Are the Best Places to Install Smoke and Carbon Monoxide Detectors?
Some of you might wonder where I should have my smoke detector and carbon monoxide detector installed? Are some places in the home better than others for setting up these sensors?
The answer is yes. Some places in the home are more suited to installing these detectors than others.
With regards to a smoke detector or a smoke detector/carbon monoxide combination detector, we consider a few things when we plan the best placement practices in your home, including:
- The center of the ceiling
- Whether there’s a sloped or slanted ceiling
- The windows, doors, or drafty areas
Our team is well aware of the optimal placement of smoke or smoke/CO combination detectors.
We also want to ensure a clear area so that the detector can pick up on any smoke or CO fast. We will keep your smoke safety devices away from windows, doors, and vents.
The optimal placement is slightly different when it comes to a simple carbon monoxide detector. We try to find a location with qualities like:
- Lower to the ground
- Within 10 feet of each bedroom
- Close to or inside an attached garage
Carbon monoxide doesn’t rise like smoke, so it can be placed in an open area and work properly. Detectors that aren’t combined with smoke detectors do well closer to the ground because they can easily pick up the leak.
Our skilled electricians have ample of experience choosing the best locations to install these detectors. You can trust our team to find the best place in your home for smoke and carbon monoxide detector installations.
Call us when you’re ready for these vital sensors to be properly placed and installed in your home!
Carbon Monoxide Detector Replacement
Everything needs to be replaced eventually, and your carbon monoxide detector is no different. These instruments are extremely sensitive, and for them to function correctly, the electrical components need to be working at their best.
Carbon monoxide detectors need to be replaced every five to seven years. Periodic replacement is the best way to protect your household from carbon monoxide poisoning.
Symptoms of Carbon Monoxide Poisoning
While it’s good to have trustworthy CO detectors in the home, you should know the symptoms to be aware of that could indicate a CO leak just in case! They are:
- Nausea
- Dizziness
- Light-headedness
- Vomiting
- Fatigue
If you feel any of these symptoms and your carbon monoxide detector is set off, you need to leave the building as soon as possible.
How Can I Prevent Carbon Monoxide Poisoning?
Accidents happen, and sometimes leaks in your home’s gas or fuel systems can occur.
Regular maintenance on these systems can help keep them airtight and protect against leaks. It is important to make sure that you are keeping your gas and fuel systems clean, repaired, and up-to-date.
You can’t always avoid every break or leak. But that’s why it is so important to ensure that your carbon monoxide detector is completely reliable.
If a leak occurs, your best line of defense is to have safe, reliable carbon monoxide detectors installed. When it comes time to schedule a carbon monoxide detector replacement, don’t put it off! Avoid the unnecessary risks of a faulty carbon monoxide detector, and call one of our skilled electrician in Clarksville today.
Smoke Detector Replacement
Let’s face it—everyone sets off their smoke alarm from time to time. Kitchens can get smokey, and we sometimes forget to take our dinner out of the oven.
With all this wear and tear, it’s no wonder that you will need a smoke detector replacement every now and then. Our electricians have the answers if you’re wondering when is the best time for a smoke detector replacement.
Smoke detectors need to be replaced every ten years. This is not a replacement you want to put off too long. Your home is vulnerable to devastating and life-threatening fires without a working smoke detector.
Remember that dinner you left in the oven too long? What if your smoke alarm never alerted you to that fact? Your burned dinner would be the least of your worries, that’s for sure.
If it’s been a while since you’ve checked on your fire alarm, it’s essential to call us as soon as possible. We are here to make sure that your alarms are replaced in a safe and timely manner.
Do I Really Need a CO and Smoke Alarm in My Home?
Although they both sense harmful gasses, smoke and carbon monoxide detectors have different functions. It might not look like it from the outside, but these instruments are very different.
While you can request that we install a combination carbon and smoke detector in your home, it still doesn’t mean you can use a plain smoke detector or carbon monoxide detector and expect it to sense like the other.
Smoke and CO are two very different kinds of gas. Each home needs finely tuned instruments to pick up on both smoke and CO, respectively.
In other words, a smoke detector will not sense carbon monoxide, and a CO detector will not pick up on smoke.
If you want your home to be safe from carbon monoxide poisoning and fire, ask the team at Travis Electrical to install both smoke and CO detectors or a combination detector today.
How Do I Find an Electrician Near Me in Clarksville, TN?
You might be asking yourself, “Is there an electrician near me who can safely install smoke detectors and carbon monoxide detectors?” Lucky for you, there absolutely is!
Our team of electricians are ready to perform smoke and CO alarm installations. Whether you are getting your detectors set up for the first time, or you are calling us for a replacement service, you can rest assured that we are highly skilled and able to help.
Our team is ready to help protect your household from CO poisoning and fires so that you can have the time to get out safely.
Contact Travis Electrical Service
Want to learn more about our alarm and detector installation services? Is it time to schedule that detector replacement service? Call the team today for full electrical services in Clarksville and the surrounding areas.